Valve-Code
Triad Audio
Triad Audio is busy getting other prototyped products ready to produce units available for dealer distribution. These include The "Head-Code", "Valve-Code" & “Portacode”
© Triad Audio 2008 Home Products FAQ About Us Contact Us Site Map Created by: Mediapresetations4u
Warranty -- Triad Audio offers a 30 day No Hassle unconditional guarantee..
We also offer a one (1) year limited warranty on the hardware of the unit. If during this period , this product proves to be defective due to improper materials or workmanship, Triad Audio, will repair or replace the unit to bring it back to original condition.
Versatility to adapt with your system
The Valve-Code provides two unbalanced 3 Conductor 1/4 inch phone jack headphone output’s as standard. One is via the output transformer and a rotary switch to select taps on the output transformer matching the valve-code to either Low, Medium as well as High impedance headphones. The other provides an OTL Capacitor coupled output directly from the plate of the output tube. This is intended mostly for the enjoyment of high impedance headphones greater than 100 Ohms without fear of any tone coloration cased from the output transformer.
An optional Balanced output is available via two optionally installed XLR type balanced output connectors to accommodate such headphones. In addition to pair of RCA line level unbalanced inputs, an additional pair of RCA outputs provide a loop output so as to preserve your systems line output facilities.
International AC mains voltage selection is user selectable via the rear aprons’ filtered IEC power entry module to allow operation anywhere in the world...
Regulated Valve Power Supply
The quality of the Power supply has more influence with Tube Amplifiers that it will with a Solid State amplifier, because the power supply rejection is a lot better with Solid State than with Tubes so any hum and noise upon the Power Supply’s output will be presented along with the desired Music to the listener and thereby reducing the listening experience. The Valve-Code is such a revealing Amplifier that it would be a shame to mate such a superb topology with a typical Power supply.
The Valve-Code uses an overbuilt power supply starting with a massive 140 watt power transformer rectified by a high current rectifier tube loafing along at a fraction of its rated output for long life and low heat.
Large capacitor banks proving a reservoir of stored energy so much so that the Amp will continue to play for almost 60 seconds after power is turned off.
Click pics for additional views